CTS V6-3.2L VIN N (2003)
25. Remove the engine mounts lower retaining nuts (2).
26. InstallJ 39580 under the frame.
27. Lower the vehicle to the frame support table.
28. Remove the frame mounting bolts (2).
29. With the aid of an assistant, carefully raise the body from the frame.
30. Ensure when raising the body the following items are clear from the frame.
*
The brake pipes
*
The steering knuckle assembly
*
The wheel speed sensor electrical harness
31. Remove the lower control arms. Refer toLower Control Arm Replacement in Front Suspension.
32. Remove the stabilizer shaft. Refer toStabilizer Shaft Replacement in Front Suspension.
33. With the aid of an assistant, remove the frame from the support fixture.
Installation Procedure
1. Install the lower control arm to the frame. Refer toLower Control Arm Replacement in Front Suspension.
2. Install the stabilizer shaft to the frame. Refer toStabilizer Shaft Replacement in Front Suspension.
Do not tighten the stabilizer shaft mounting bolts at this time.