CTS V6-3.2L VIN N (2003)
7.
Using a small screwdriver or pick, remove the TCC PWM solenoid retainer from the control valve body.
Important:
Loosen, DO NOT REMOVE the valve body bolts and manual shift detent bolt.
8.
Loosen, DO NOT remove the 8 E8 Inverted TORX(R) bolts on the valve body.
9.
Loosen, DO NOT remove the rear manual shift detent bolt (3).
10.
Lower the valve body enough to gain clearance for the TCC solenoid to clear the transmission case.
11.
Remove the TCC PWM solenoid (1) from the control valve body.
12.
Inspect the removed TCC PWM solenoid (1). The removed plastic connector may be labeled "2690".
Important:
^
The "2690" TCC PWM solenoid is the suspect solenoid and should NOT BE REUSED.
^
The new TCC PWM solenoid, P/N 96042599, is labeled "7792" and should be the ONLY solenoid used.
13.
Install the new TCC PWM solenoid, P/N 96042599 labeled "7792", (1) into the control valve body.
