CTS V6-3.2L VIN N (2003)
8. Secure the front propeller shaft (1) to the shift control lever (3) with a piece of mechanics wire (2).
9. Install J45012 to the drive flange.
10. While holding J45012. Remove the drive flange nut using J29873.
11. Remove J45012 from the drive flange.
12. Remove the drive flange thrust washer (4).
13. Remove the drive flange (2) using J45019.
14. Remove the drive flange O-ring seal (3) from the drive flange.
15. Remove the output shaft assembly retainer (1).