CTS V6-3.2L VIN N (2003)
Rear Door Window Glass Weatherstrip: Service and Repair
Door Window Channel
Window Channel Replacement - Rear Door Front
Window Channel Replacement - Rear Door Front
Removal Procedure
1. Ensure that the window is fully closed.
2. Remove the door trim panel. Refer toTrim Panel Replacement - Side Rear Door See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Rear Door Panel/Service and Repair
3. Remove the water deflector. Refer toWater Deflector Replacement - Rear Door (See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Rear Door Panel/Service and Repair) .
4. Loosen the lower bolt.
5. Remove the upper bolt.
6. Rotate the top of the front window channel forward.
7. Lift upward on the window channel to disengage the lower bolt from the keyhole slot.
8. Remove the front window channel from the door.
Installation Procedure
1. Install the front window channel into the door, top end first.
2. Insert the lower bolt into the keyhole slot.
3. Rotate the top of the front window channel rearward and align on the lower edge of the window.
Notice: Refer toFastener Notice in Cautions and Notices.
4. Install the upper bolt.
Tighten the bolts to 9 Nm (80 lb in).
5. Install the water deflector. Refer toWater Deflector Replacement - Rear Door (See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Rear Door Panel/Service and Repair) .
6. Install the door trim panel. Refer toTrim Panel Replacement - Side Rear Door See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Rear Door Panel/Service and Repair
Window/Division Channel - Rear Door Stationary
Window/Division Channel - Rear Door Stationary
Removal Procedure