CTS V6-3.2L VIN N (2003)
6. Remove the washer nozzles from the hood by pushing the tension clips (2) in towards the windshield.
7. Push the washer nozzle (3), outward toward the windshield.
8. Remove the washer nozzles (3) from the hood.
INSTALLATION PROCEDURE
1. Position the electrical connector (1) through the opening in the hood.
2. Install the washer nozzles (3) to the hood by indexing the tension clips (2) on the nozzle to the opening in the hood.
3. Push downward in order to secure the washer nozzle tension clips (2) to the hood.
4. Connect the electrical connectors (2,5).
5. Secure the electrical connector to the hood clip with new electrical tape.
6. Connect the washer hose connections (3,6) to the washer nozzles.
