CTS V6-3.2L VIN N (2003)
Windshield Washer Switch: Service and Repair
WIPERS/WASHER SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in Restraint Systems.
CAUTION: Refer to SIR Caution in Service Precautions.
2. Remove the steering column trim covers.
3. Remove the steering column wiring harness tie straps (1,2).
4. Disconnect the module electrical connectors (2).
5. Open the wire harness shield (1) at the lower steering column and remove the wire harness (2).