CTS V6-3.2L VIN N (2003)
Wiper Gear Box: Service and Repair
WIPER TRANSMISSION REPLACEMENT
TOOLS REQUIRED
-
J 39232 Wiper Linkage Separator
-
J 39529 Wiper Linkage Installer
REMOVAL PROCEDURE
1. Remove the wiper arms (1,4).
2. Remove the air inlet grille panel.
3. Pull or push on the wiper transmission linkage to rotate the wiper motor crank arm (2) from the park position (1) to the area opposite the park
position (3).
4. Disconnect the wiper motor harness connector (4).
5. Remove the 2 screws (3,5) retaining the wiper system drive module.
6. Remove the wiper system drive module (1) from the vehicle.
