CTS V8-5.7L VIN S (2005)
4. Position the upper sail panel downward next to the end of the rear shelf trim panel.
5. Insert the upper metal integral clip (1) on the trim panel to the slot located in the headliner.
6. Insert the lower metal integral clip (2) to the sheet metal.
7. Position the plastic push-in retainer (3) to the hole in the sheet metal.
8. Press inward at the plastic retainer in order to secure.
Notice: refer to Fastener Notice in Cautions and Notices.
9. Install the fastener with a magnetic-tipped screwdriver.
Tighten the screw to 2 Nm (18 lb in).
10. Secure the seat belt escutheon to the sail panel.
11. Install the screw cover to the sail panel.