CTS V8-6.0L (2007)
Seat Latch: Service and Repair
Seat Back Release Latch Replacement - Rear
Removal Procedure
1. Remove the rear seat back cover and pad. Refer to Seat Back Cover and Pad - Rear Split Folding .
2. Drill out the rivets (1) retaining the latch to the seat frame.
3. Push in on the release tab retaining the cable to the seat frame.
4. Remove the latch assembly from the seat frame.
Installation Procedure
1. Install the latch assembly into position.
Rivet the latch into place.
2. Install the latch release cable into the retaining slot.
3. Install the rear seat cover and pad. Seat Back Cover and Pad - Rear Split Folding .