CTS V8-6.0L (2007)
Lifter / Lash Adjuster: Service and Repair
Valve Lifter Replacement
Removal Procedure
1. Remove the cylinder head.
2. Remove the valve lifter guide bolts (211).
3. Remove the guides (210) with lifters. Note the installed position of the guides. The notched area of the guide is to align with the locating tab on the
block.
4. Remove the valve lifters (209) from the guide (210).
5. Organize or mark the components so they can be installed in the same location from which they were removed. Refer to Separating Parts.
6. Clean and inspect the valve lifters and guides.
Installation Procedure