CTS V8-6.0L (2007)
5. Connect the discharge hose to the condenser.
Notice: Refer to Fastener Notice.
6. Install the discharge hose bolt (1).
Tighten the bolt to 5.4 N.m (48 lb in).
7. Lube O-ring with refrigerant oil before installing. Refer to O-Ring Replacement.
8. Connect the liquid line to the condenser.
9. Connect the liquid line bolt (1) to the condenser.
Tighten the bolt to 5.4 N.m (48 lb in).
10. Install the air deflector.
11. Install the upper condenser bolts.
Tighten the bolts to 3.9 N.m (35 lb in).
12. Install the radiator support brackets.
13. Evacuate and recharge the refrigerant system. Refer to Refrigerant Recovery and Recharging.
14. Leak test all fittings of the repaired or reinstalled components using the J 39400-A.
