CTS V8-6.0L (2007)
* Handle the MAF sensor carefully.
* Do not drop the MAF sensor in order to prevent damage to the MAF sensor.
* Do not damage the screen located on the air inlet end of the MAF.
* Do not touch the sensing elements.
* Do not allow solvents and lubricants to come in contact with the sensing elements.
* Use a small amount of a soap based solution in order to aid in the installation.
1. Carefully install the MAF/IAT sensor to the air cleaner outlet duct. Ensure that sensor is clocked properly.
Notice: Refer to Fastener Notice.
2. Tighten the air cleaner outlet duct clamp (2).
Tighten the air cleaner outlet duct clamp to 3 N.m (27 lb in).
3. Loosely install the air cleaner outlet duct assembly to the vehicle.
4. Connect the MAF/IAT sensor electrical connector.
5. Install the air cleaner outlet duct assembly.