CTS Coupe AWD V6-3.6L (2011)
7. Index the rear side frame mounts to the rear locator sleeves (1) located on the body.
8. Lower the vehicle until the frame mounts contact the body rail.
Caution: Refer to Fastener Caution .
9. Install the rear frame washers (3) and anchor bolts (4).
*
Tighten the front bolts to 250 Nm (180 lb ft).
*
Tighten the rear bolts to 191 Nm (141 lb ft).
10. Raise the vehicle.
11. Remove the J 39580 .
12. Install the support fixture (3) in order to raise the lower control arms for ease of lower shock bolt installation (2).
13. Install the lower shock bolt (2) to 150 Nm (111 lb ft).
14. Repeat the above step for the other side.
15. Remove the support fixture (3).
16. Install the intermediate park brake cable to the body bracket.
17. Connect the intermediate park brake cable (2) to the front park brake cable connector.
