CTS RWD V6-3.6L (2008)
Parking Assist Distance Sensor: Service and Repair
Rear Object Sensor Housing Replacement
Rear Object Sensor Housing Replacement
1. Remove the rear fascia. Refer to Rear Bumper Fascia Replacement (See: Body and Frame/Bumper/Rear Bumper/Rear Bumper Cover /
Fascia/Service and Repair/Rear Bumper Fascia Replacement) .
2. Disconnect the sensor harness.
3. Remove the sensor from the sensor housing.
The sensor housing must be painted if replaced. If reinstalled, painting will not be necessary.
Important: Do Not grind off alignment tabs.
4. Sand/grind sonic weld plastic residue from the fascia.