CTS RWD V6-3.6L (2008)
2. Install the electrical connector.
3. Install the door latch into the door.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the door latch screws (3).
Tighten the screws to 10 N.m (89 lb in).
5. Install the inside handle cable into the retainers (1).
6. Install the outside door handle rod (1) into the latch clip (2), if equipped.
7. Close the clip.
8. Check for proper operation of the door handles, lock cylinder, and door latch.
9. Install the water deflector.
10. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement (See: Front Door Panel/Service and Repair) .