CTS RWD V6-3.6L (2008)
Tighten the motor attachment screws to 3.5 N.m (31 lb in).
3. Connect the electrical connector to the motor/actuator.
4. Remove the pin (1) from the holes that held the position while installing the drive motor.
5. Install the headliner. Refer to Headlining Trim Panel Replacement (See: Interior Moulding / Trim/Headliner/Service and Repair) .
6. Perform the Initialization/Teach Procedure. Refer to Sunroof Motor/Actuator Initialization/Teach Process (See: Testing and
Inspection/Programming and Relearning) .
7. Verify the operation of the sunroof.