CTS RWD V6-3.6L (2008)
6. Connect the LF brake pipe fitting (1).
Tighten the brake pipe fitting to 18 N.m (13 lb ft).
7. Connect the EBCM electrical connector
8. Position the washer solver container and install the fasteners. Refer to Windshield Washer Solvent Container Replacement (Minus CE4) (See:
Wiper and Washer Systems/Windshield Washer Reservoir/Service and Repair/Windshield Washer Solvent Container Replacement (Minus CE4)
)Windshield Washer Solvent Container Replacement (With CE4) (See: Wiper and Washer Systems/Windshield Washer Reservoir/Service and
Repair/Windshield Washer Solvent Container Replacement (With CE4)) .
9. Install the front air deflector shield. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air
Dam/Service and Repair/Front Air Deflector Replacement) .
10. Lower the vehicle.
11. Connect the primary BPMV inlet brake pipe fitting (1).
Tighten the brake pipe fitting to 32 N.m (24 lb ft).
