CTS RWD V6-3.6L (2008)
Brake Pedal Assy: Service and Repair
Brake Pedal Assembly Replacement
Removal Procedure
1. Remove the vacuum brake booster. Refer to Power Vacuum Brake Booster Replacement (See: Power Brake Assist/Vacuum Brake
Booster/Service and Repair) .
2. Without disconnecting the front park brake cable, remove the park brake pedal assembly and position aside. Refer to Parking Brake Lever Pedal
Assembly Replacement (See: Parking Brake System/Parking Brake Lever/Service and Repair/Parking Brake Lever Pedal Assembly Replacement)
.
3. Without disconnecting the steering column from the intermediate shaft, lower and support the steering column. Refer to Steering Column
Replacement (See: Steering and Suspension/Steering/Steering Column/Service and Repair/Steering Column Replacement) .
4. Disconnect the brake pedal position sensor (1) electrical connector.