CTS RWD V6-3.6L (2008)
9. Remove the brake caliper and support with heavy mechanics wire or equivalent.
10. Remove the outer brake pad (1).
11. Remove the inner brake pad (2).
12. Remove the outer brake pad springs (1).
13. Remove the inner brake pad springs (2).
Installation Procedure
1. Inspect the brake caliper guide pins, seals and brake pad springs for damage and/or corrosion. Refer to Front Disc Brake Mounting and Hardware
Inspection (See: Testing and Inspection/Component Tests and General Diagnostics/Front Disc Brake Mounting and Hardware Inspection) .
