CTS RWD V6-3.6L (2008)
7. Disconnect the primary BPMV inlet brake pipe fitting (1).
Cap the brake pipe fitting and plug the BPMV inlet port to prevent brake fluid loss and contamination.
8. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
9. Remove the front air deflector shield. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air
Dam/Service and Repair/Front Air Deflector Replacement) .
10. Remove the washer solvent container fasteners and position the washer solvent container aside. Refer to Windshield Washer Solvent Container
Replacement (Minus CE4) (See: Wiper and Washer Systems/Windshield Washer Reservoir/Service and Repair/Windshield Washer Solvent
Container Replacement (Minus CE4))Windshield Washer Solvent Container Replacement (With CE4) (See: Wiper and Washer
Systems/Windshield Washer Reservoir/Service and Repair/Windshield Washer Solvent Container Replacement (With CE4)) .
11. Disconnect the EBCM electrical connector
12. Disconnect the LF brake pipe fitting (1).
Cap the brake pipe fitting and plug the BPMV outlet port to prevent brake fluid loss and contamination.
