CTS RWD V6-3.6L (2008)
2. Install the retaining bolts that secure the cooling fan shroud to the radiator.
Tighten the bolts to 5.4 N.m (48 lb in).
3. Engage the surge tank inlet hose to the retaining features on the cooling fan shroud.
4. Connect the condenser tube to the cooling fan shroud retainer clip.
5. Install the auxiliary water pump and any hoses.
6. Connect any hoses or pipes.
7. Connect the cooling fan electrical connectors.
8. Install the air cleaner. Refer to Air Cleaner Assembly Replacement (See: Engine/Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair) .
