CTS RWD V6-3.6L (2008)
Water Pump: Service and Repair
Water Pump Replacement
Water Pump Replacement (LY7, LLT)
Special Tools
EN 46104 Water Pump Pulley Holding Tool
Removal Procedure
1. Drain the cooling system. Refer to Cooling System Draining and Filling (GE 47716) (See: Service and Repair)Cooling System Draining and
Filling (Static Fill) (See: Service and Repair) .
2. Remove the generator drive belt. Refer to Water Pump and Generator Belt Replacement (See: Engine/Drive Belts, Mounts, Brackets and
Accessories/Drive Belt/Service and Repair/Water Pump and Generator Belt Replacement) .
3. Use the EN 46104 (1) in order to retain the water pump pulley.
4. Remove the water pump pulley bolts.
5. Remove the water pump pulley.