CTS RWD V6-3.6L (2008)
4. Install the water pump pulley and the water pump pulley bolts.
5. Use the EN 46104 (1) in order to retain the water pump pulley.
6. Install the water pump pulley bolts.
Tighten the water pump pulley bolts to 12 N.m (106 lb in).
7. Install the generator drive belt. Refer to Water Pump and Generator Belt Replacement (See: Engine/Drive Belts, Mounts, Brackets and
Accessories/Drive Belt/Service and Repair/Water Pump and Generator Belt Replacement) .
8. Fill the cooling system. Refer to Cooling System Draining and Filling (GE 47716) (See: Service and Repair)Cooling System Draining and Filling
(Static Fill) (See: Service and Repair) .
