CTS RWD V6-3.6L (2008)
Installation Procedure
1. Install the crankshaft balancer. Refer to Crankshaft Balancer Installation (See: Service and Repair/Overhaul) .
2. Install the front air deflector. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair/Front Air Deflector Replacement) .
3. Remove the EN-48018 flywheel holding tool.
4. Install the transmission bell housing inspection hole cover.
5. Install the generator and water pump drive belt. Refer to Air Conditioning Compressor and Power Steering Pump Belt Tensioner Replacement (
See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt Tensioner/Service and Repair/Air Conditioning Compressor and Power Steering
Pump Belt Tensioner Replacement) .
6. Install the A/C compressor and power steering pump drive belt. Refer to Water Pump and Generator Belt Tensioner Replacement (See: Drive
Belts, Mounts, Brackets and Accessories/Drive Belt Tensioner/Service and Repair/Water Pump and Generator Belt Tensioner Replacement) .