CTS RWD V6-3.6L (2008)
1. Install the engine mount to the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the upper engine mount retaining nut.
Tighten the nut to 80 N.m (59 lb ft).
3. Lower the engine using the jack screw until the weight is resting on the mount.
4. Install the engine mount retaining nut.
Tighten the nut to 80 N.m (59 lb ft).
5. Remove the jack screw and block of wood from under the oil pan.
6. Lower the vehicle.
