CTS RWD V6-3.6L (2008)
Important: Use a 6-point socket to install the oil filter cap.
5. Install the oil filter cap.
Tighten the oil filter cap to 25 N.m (18 lb in).
6. Install the oil fill cap.
7. Fill the engine with the appropriate oil type and quantity. Refer to Fluid and Lubricant Recommendations (See: Maintenance/Specifications/Fluid
Type Specifications) and Approximate Fluid Capacities (See: Maintenance/Specifications/Capacity Specifications) .
8. Install the front compartment sight shield as necessary. Refer to Front Compartment Sight Shields Replacement (See: Body and Frame/Spoilers,
Flaps, and Air Dams/Air Dam/Service and Repair/Front Compartment Sight Shields Replacement) .
