CTS RWD V6-3.6L (2008)
6. Connect the intake manifold runner control solenoid electrical connector.
7. Connect the PCV hose to the right bank camshaft cover.
8. Install the upper intake manifold brace, stud (1) and bolt (2).
Tighten the intake manifold brace bolt/stud.
1. Tighten the intake manifold brace bolt (2) to 65 N.m (48 lb ft).
2. Tighten the intake manifold brace stud (1) to 10 N.m (89 lb in).