CTS RWD V6-3.6L (2008)
12. Connect the purge solenoid valve electrical connector.
13. Connect the brake booster vacuum hose to the intake manifold.
14. Install the air outlet duct. Refer to Air Cleaner Outlet Duct Replacement (LY7) (See: Tune-up and Engine Performance Checks/Air Cleaner
Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement (LY7) VIN 7 W/O Direct Fuel Injection)Air
Cleaner Outlet Duct Replacement (LLT) (See: Tune-up and Engine Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air
Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement (LLT) VIN V W/ Direct Fuel Injection) .
15. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (LP1, LY7) (See: Powertrain Management/Fuel Delivery and
Air Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement (LY7) VIN 7 W/O Direct Fuel Injection)Fuel Injector
Sight Shield Replacement (LLT) (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Fuel Injector
Sight Shield Replacement (LLT) VIN V W/ Direct Fuel Injection) .
