CTS RWD V6-3.6L (2008)
5. Tighten the right exhaust camshaft position actuator bolt.
Tighten the bolt to 58 Nm (43 lb ft).
6. Install the right intake and exhaust camshaft position actuator solenoids. See: Variable Valve Timing Solenoid/Service and Repair
7. Install the right intake and exhaust camshaft position sensors. See: Powertrain Management/Computers and Control Systems/Camshaft Position
Sensor/Service and Repair
8. Install the right camshaft cover. See: Cylinder Head Assembly/Valve Cover/Service and Repair
9. On LLT engines, install the intake manifold. See: Intake Manifold/Service and Repair
10. On LP1 and LY7 engines, install the lower intake manifold with the upper manifold. See: Intake Manifold/Service and Repair
