CTS RWD V6-3.6L (2008)
Compressor Clutch Hub: Service and Repair
Compressor Clutch Plate/Hub Assembly Replacement
Removal Procedure
1. Remove the engine belt. Refer to Air Conditioning Compressor and Power Steering Pump Belt Replacement (See: Engine, Cooling and
Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Air Conditioning Compressor and Power Steering
Pump Belt Replacement) .
2. Remove the clutch plate retaining bolt (1).
3. Remove the clutch plate assembly (2).
4. Remove the clutch hub/bearing snap ring (3).
5. Remove the clutch hub/bearing assembly (4).
Installation Procedure