CTS RWD V6-3.6L (2008)
6. Install the screws that hold the case together.
Tighten the screws to 1 N.m (8 lb in).
7. Install the clips that hold the case together.
8. Connect the thermistor electrical connector.
9. Lube A/C lines with refrigerant oil before installing. Refer to O-Ring Replacement (See: Coupler HVAC/A/C Coupler O-ring/Service and Repair)
.
10. Install the A/C lines into the TXV.
11. Carefully slide the TXV onto the evaporator core until seated.
12. Install the TXV line bracket.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
13. Install the TXV to evaporator bolts (1).
Tighten the bolts to 3.5 N.m (31 lb in).
