CTS RWD V6-3.6L (2008)
7. Connect the condenser tube to the fan shroud retainer clip.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
8. Install the condenser tube to condenser retaining bolt.
Tighten the bolt to 9 N.m (80 lb in).
9. Install the front air deflector. Refer to Front Bumper Fascia Air Deflector Replacement (See: Body and Frame/Bumper/Front Bumper/Front
Bumper Cover / Fascia/Service and Repair/Front Bumper Fascia Air Deflector Replacement) .
10. Lower the vehicle.
11. Install the A/C quick connect fitting at the liquid line. Refer to Air Conditioning Line/Tube Connector Removal/Replacement (See: Air
Conditioning Line/Tube Connector Removal/Replacement) .
12. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Service and Repair) .
13. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging (See: Service and Repair/Refrigerant Recovery and
Recharging) .
14. Using J 39400-A , leak test the fittings of the component.