CTS RWD V6-3.6L (2008)
Align the pin on the indicator switch to the locator hole on the parking brake lever.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Tighten the parking brake indicator switch bolt.
Tighten the bolt to 7 N.m (62 lb in).
4. Connect the parking brake indicator switch electrical connector.
5. Install the left instrument panel insulator panel. Refer to Instrument Panel Insulator Replacement - Left Side (See: Dashboard / Instrument
Panel/Service and Repair) .