CTS RWD V6-3.6L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the power steering fluid cooler bracket bolt.
Tighten the bolt to 10 N.m (89 lb in).
4. Connect the power steering reservoir inlet hose and the power steering gear outlet hose to the power steering cooler hose.
5. Clean any excess fluid from the vehicle and remove the drain pans.
6. Install the front air deflector. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair/Front Air Deflector Replacement) .
7. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (See: Steering and Suspension/Steering/Power Steering/Power
Steering Bleeding/Service and Repair) .
