CTS RWD V6-3.6L (2008)
*
Terminal 9
‹› If greater than the specified range, test the serial data circuit for a short to voltage.
17. Ignition OFF, test for infinite resistance between the BCM serial data circuit terminals 8 and 9.
‹› If less than the specified value, test for a short between the serial data circuits.
18. If all circuits test normal, replace the BCM.
Repair Instructions
Perform the Diagnostic Repair Verification (See: Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests
and Procedures) after completing the repair.
Control Module References (See: Testing and Inspection/Programming and Relearning)for control module replacement, setup, and programming
