CTS RWD V6-3.6L (2008)
*
Isolator Cup (5)
*
Teflon Seal (6)
2. From the EN-48266 , position the EN 48266-1 to the injector tip.
Important: DO NOT lubricate the NEW seal.
3. Install a NEW seal onto the EN 48266-1.
*
Isolator Cup (5)
*
Teflon Seal (6)
2. From the EN-48266 , position the EN 48266-1 to the injector tip.
Important: DO NOT lubricate the NEW seal.
3. Install a NEW seal onto the EN 48266-1.