CTS RWD V6-3.6L (2008)
4. Pull the NEW seal by hand over the EN 48266-1 and into the groove in the injector.
5. Remove the EN 48266-1 from the injector tip.
6. From the EN-48266 , install the EN 48266-2 to the injector tip.
4. Pull the NEW seal by hand over the EN 48266-1 and into the groove in the injector.
5. Remove the EN 48266-1 from the injector tip.
6. From the EN-48266 , install the EN 48266-2 to the injector tip.