CTS RWD V6-3.6L (2008)
1. Install the front compartment sight shield, if necessary. Refer to Front Compartment Sight Shields Replacement (See: Body and Frame/Spoilers,
Flaps, and Air Dams/Air Dam/Service and Repair/Front Compartment Sight Shields Replacement) .
2. Position the engine cover/sight shield to the rear tabs (3).
3. Position the engine cover/sight shield (2) over the intake manifold so the grommets are aligned with the ball studs.
4. Press the engine cover/sight shield down firmly near the ball studs in order to install the engine cover/sight shield.
5. Install the oil fill cap (1).
6. Install the cross car brace, if necessary. Refer to Cross Vehicle Brace Replacement (See: Body and Frame/Frame/Cross-Member/Service and
Repair/Cross Vehicle Brace Replacement) .
