CTS RWD V6-3.6L (2008)
Fuel Line Coupler: Service and Repair
Metal Collar Quick Connect Fitting Service
Metal Collar Quick Connect Fitting Service
Tools Required
*
J 37088-A Fuel Line Disconnect Tool Set
*
J 44581 Fuel Line Disconnect Tool
Removal Procedure
Caution: Refer to Gasoline/Gasoline Vapors Caution (See: Fuel/Service Precautions/Gasoline/Gasoline Vapors Caution) .
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH 48027 - LP1, LY7) (See: Fuel Filter/Fuel Pressure Release/Service and
Repair/Fuel Pressure Relief (With CH 48027) (LY7) VIN 7 W/O Direct Fuel Injection)Fuel Pressure Relief (Without CH 48027 - LP1, LY7) (
See: Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel Pressure Relief (Without CH 48027) VIN 7 W/O Direct Fuel Injection)Fuel
Pressure Relief (With High Pressure Pump - LLT) (See: Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel Pressure Relief (With High
Pressure Pump (LLT) VIN V W/ Direct Fuel Injection) .
2. Remove the retainer from the quick-connect fitting.
Caution: Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.
3. Blow dirt out of the fitting using compressed air.
4. Depending on the fuel line size and ability to access the fitting, choose the appropriate tool: J 37088-A or J 44581 . Insert the J 37088-A or J
