CTS RWD V6-3.6L (2008)
Fuel Supply Line: Service and Repair
Fuel Hoses/Pipes Replacement - Filter to Tank
Fuel Hoses/Pipes Replacement - Filter to Tank
Removal Procedure
1. Remove the fuel tank. Refer to Fuel Tank Replacement (See: Fuel Tank/Service and Repair) .
Notice: Clean all of the following areas before performing any disconnections in order to avoid possible contamination in the system:
*
The fuel pipe connections
*
The hose connections
*
The areas surrounding the connections
2. Disconnect the fuel lines from the primary fuel tank module. Refer to Metal Collar Quick Connect Fitting Service (See: Fuel Line Coupler/Service
and Repair/Metal Collar Quick Connect Fitting Service) and Plastic Collar Quick Connect Fitting Service (See: Fuel Line Coupler/Service and
Repair/Plastic Collar Quick Connect Fitting Service) .
3. Disconnect the hoses from the retaining feature at the fuel tank.
Installation Procedure
1. Clean any contamination from the male pipe ends of the primary fuel tank module.
2. Connect the hoses to the retaining feature at the fuel tank.
3. Connect the fuel lines from the primary fuel tank module. Refer to Metal Collar Quick Connect Fitting Service (See: Fuel Line Coupler/Service
and Repair/Metal Collar Quick Connect Fitting Service) and Plastic Collar Quick Connect Fitting Service (See: Fuel Line Coupler/Service and
Repair/Plastic Collar Quick Connect Fitting Service) .
4. Install the fuel tank. Refer to Fuel Tank Replacement (See: Fuel Tank/Service and Repair) .
