CTS RWD V6-3.6L (2008)
Fuel Filler Hose: Service and Repair
Filler Tube Replacement
Removal Procedure
1. Remove the fuel filler cap.
2. Drain the fuel tank below the level of the fuel filler hose. Refer to Fuel Tank Draining (See: Service and Repair) .
3. Remove the bolts securing the fuel filler tube to the body.
4. Remove the right rear wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair) .
5. Remove the right rear wheelhouse liner. Refer to Rear Wheelhouse Liner Panel Replacement (See: Body and Frame/Fender/Rear Fender/Rear
Fender Liner/Service and Repair) .
6. Remove the fuel filler tube brace bolt.
7. Disconnect the fuel filler hose (1) from the fuel tank.
8. Disconnect the filler vent tube (2) from the evaporative emission (EVAP) hose. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel
Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service) .
9. Remove the fuel filler tube from the vehicle.
Installation Procedure
1. Position the fuel filler tube to the vehicle.
Notice: Refer to Component Fastener Tightening Notice (See: Service Precautions/Vehicle Damage Warnings/Component Fastener Tightening
