CTS RWD V6-3.6L (2008)
See: Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service) .
3. Remove the fuel feed hose (2) from the retainer on the fuel tank and position the hose aside.
4. Release the interlock and disconnect the electrical connector (3) from the primary fuel tank module.
5. Remove the wire harness (1) from the retainer on the fuel tank and position the harness aside.
Notice: Avoid damaging the lock ring. Use only J-45722 to prevent damage to the lock ring.
Notice: Do Not handle the fuel sender assembly by the fuel pipes. The amount of leverage generated by handling the fuel pipes could damage the
joints.
Important:
*
DO NOT use impact tools. Significant force will be required to release the lock ring. The use of a hammer and screwdriver is not
recommended. Secure the fuel tank in order to prevent fuel tank rotation.
*
Do not allow the tool to come in contact with the fuel pipe while unlocking the cam lock ring.
6. Use the J 45722 (2) and a long breaker-bar (1) in order to unlock the fuel tank module lock ring (3), by turning counterclockwise.
7. Remove the cam lock ring.
