CTS RWD V6-3.6L (2008)
1. Install the CMP sensor.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the CMP sensor bolt.
Tighten the bolt to 10 N.m (89 lb in).
3. Connect the CMP sensor electrical connector.
4. Install the front compartment sight shields as necessary. Refer to Front Compartment Sight Shields Replacement (See: Body and Frame/Spoilers,
Flaps, and Air Dams/Air Dam/Service and Repair/Front Compartment Sight Shields Replacement) .
