CTS RWD V6-3.6L (2008)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake
Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake
Removal Procedure
1. Turn the ignition OFF.
2. Remove the front compartment sight shields as necessary. Refer to Front Compartment Sight Shields Replacement (See: Body and
Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service and Repair/Front Compartment Sight Shields Replacement) .
3. Disconnect the camshaft position (CMP) sensor electrical connector.
4. Remove the CMP sensor bolt.
5. Remove the CMP sensor.
Installation Procedure