CTS RWD V6-3.6L (2008)
Installation Procedure
Important: If you are installing a new lock cylinder, refer to Key and Lock Cylinder Coding (See: Procedures) .
1. Position the ignition lock cylinder in the run position and insert it into the lock housing.
2. Rotate the ignition lock cylinder in the housing. Verify proper rotation.
3. Install the steering column shroud. Refer to Steering Column Shroud Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Shroud Replacement) .
4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Side Post) (See: Starting and
Charging/Battery/Battery Cable/Service and Repair) .
