CTS RWD V6-3.6L (2008)
4. Install the wheel speed sensor wire harness clips (1) to the vehicle frame.
5. Connect the wheel speed sensor electrical connector (1).
6. Install the front bumper fascia lower closeout panel. Refer to Front Bumper Lower Fascia Replacement (See: Body and Frame/Bumper/Front
Bumper/Front Bumper Cover / Fascia/Service and Repair/Front Bumper Lower Fascia Replacement) .
7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair) .
