CTS RWD V6-3.6L (2008)
Installation Procedure
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
1. Install the wheel speed sensor and bolt (1) to the suspension knuckle.
Tighten the bolt to 9 N.m (80 lb in).
2. Install the wheel speed sensor wire harness clips (1) to the upper control arm and vehicle frame.
3. Connect the wheel speed sensor electrical connector (2).
4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair) .