CTS RWD V6-3.6L (2008)
Ignition Switch Lock Cylinder: Removal and Replacement
Ignition Lock Cylinder Replacement
Removal Procedure
1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Side Post) (See: Battery/Battery
Cable/Service and Repair) .
2. Remove the steering column shroud. Refer to Steering Column Shroud Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Shroud Replacement) .
3. Turn the ignition lock cylinder to the RUN position.
4. Depress the retainer through the lock housing access hole (1) with a small Allen wrench or similar pick-type tool.
5. Remove the ignition lock cylinder from the lock housing.