CTS RWD V6-3.6L (2008)
Power Steering Fluid Cooler: Service and Repair
Power Steering Fluid Cooler Replacement
Removal Procedure
1. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
2. Remove the front air deflector. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair/Front Air Deflector Replacement) .
3. Place drain pans under the vehicle as needed.
4. Disconnect the power steering cooler hose from the power steering fluid cooler.
5. Loosen the front bumper fascia enough to pull it forward and remove the power steering fluid cooler bracket bolt (1). Refer to Front Bumper
Fascia Replacement (See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair/Front Bumper Fascia
Replacement) .