CTS RWD V6-3.6L (2008)
Repair/Front Frame Replacement (Rear Wheel Drive))Front Frame Replacement (All Wheel Drive) (See: Suspension/Subframe/Front
Subframe/Service and Repair/Front Frame Replacement (All Wheel Drive)) .
15. Slowly lift the vehicle on the hoist until there is enough room to remove the steering gear from the vehicle.
16. Remove the steering gear nuts (1) and bolts (2).
17. Remove the steering gear from the front frame.
Installation Procedure
1. Position the steering gear to the front frame.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the steering gear nuts (1) and bolts (2).
Tighten the nuts to 85 N.m (63 lb ft).
